Local Errors
Local errors are errors that are the result of problems with the local computer; that is, the one the InfoRad Wireless software is running on.
For local errors, check the following:
- Make sure the modem is properly connected and turned on.
- Verify your modem selection, advanced settings, and other modem options are correct in Communications Setup.
- Check to see if any other communications program is currently using your modem or hasnt properly disconnected from it.
- Reset or power down your modem. If it is an internal modem, power your system down and reboot.
More...
(1104) Local Error: Could not access modem
This means that the InfoRad Wireless software tried to open the comport and could not get an OK response from the modem. This could be because the port could not be opened (port was busy, or it did not exist) or because the modem did not respond (modem was turned off, or is on another port, etc.).
More...
(1105) Local Error: Line is not available
This means that the line device selected for sending pages is unavailable to the system. Usually this means that the line is in use by some other application.
- Verify
that the phone line that is plugged into your
modem is functional and plugged into the
correct port of the modem.
More...
Return to top of page
Copyright
© 2000 - 2003 InfoRad, Inc.
All
Rights Reserved
Makers of AlphaPage® Wireless Messaging Products
since 1985. |